PAGE EDITOR(S): Isabella Norcini, Daniela Reyes-Capo, Stephanie Rice, Carla Pacini, Jason Schwartz

Due Date: 11/02/09 (Monday)

Natland Note (11/11/09): Be sure to check the requirements or this assignment on the homepage of this wiki. There should be more pictures/links with related pictures. Additionally, there is still a caption below that has not filled in and there are still broken picture links.

Natland Note (11/03/09): Nice job guys. This is really looking good! Remember to write a caption for the formula 1 race car below. Also, make sure you have completed everything (e.g. right number of links, pictures, etc. - excluding the few I posted). Also, ALL MEMBERS of the group need to post something. Part of the grade for the wiki is participation.



Chapter 4: Forces

Force: a push or pull on an object due to the object’s interaction w/ another object
à Something capable of changing an object’s state of motion, that is changing its velocity

When the interaction ceases the objects will no longer experience a force

Newton’s Laws of Motion

1st Law:
-An object(s) will stay in its current state of motion (at rest or moving at a constant velocity) unless an external net force is applied to the system/object(s)
-If no net force acts on a body (Fnet = 0), the body’s velocity cannot change (it cannot accelerate) (Net force is the same thing as a resultant force)
-No net force:
1) No change in magnitude of the velocity (speed)
2)No change in the direction of the velocity vector
In other words:
I. Every object in a state of uniform motion tends to remain in that state of motion unless an external force is applied to it.


Inertia: natural tendency for an object to resist change in its motion
-Quantitative measure of mass
-The more quantitative is the more inertia

2nd Law
-When an external net force (Fnet = ∑F) acts on a system of mass “m”, the acceleration, is directly proportional to the net force
∑ F = ma
A =( ∑ F )/ m

-a is in the same direction as Fnet
-Units: kg x m/s2 à N (Newton)
In other words:
II. The relationship between an object's mass m, its acceleration a, and the applied force F is F = ma. Acceleration and force are vectors (as indicated by their symbols being displayed in slant bold font); in this law the direction of the force vector is the same as the direction of the acceleration vector.


Free-Body Diagram (FBD)
-Shows the relative magnitude and direction (including the angle of all forces acting on a system in a given situation)
-Vector diagram where all forces acting upon a system are drawn “tail-to-tail”
-Only show forces applied to the system not by the system

Identifying Forces
1) Identify “the system” and the “environment”
-System: object(s) whose motion you want to study
-Environment: everything else (including ropes, springs, ground, etc.)
2) Draw a picture of the situation
-List knowns and unknowns
-Ask yourself where and how does the environment interact with your chosen system?
-Draw F.B.D. (all forces acting on system à MAR)
1. Contact Forces: two objects have to be in contact to be considered interacting
2. Long Range Forces: do not require contact (ex: magnet)

Types of Forces
- External Force: a force acting on your chosen system from the environment
- Internal Force: a force between bodies/objects within your chosen system

1) Forces of Gravity (Fg): gravitational attraction between to objects w/ mass
a. Equation: (Gm1m2)/r2
i. m1m2- Two masses being attracted to each other (kg)
ii. r-the radial distance between the centers of the two objects (if they are symmetric) (m)
iii. G- Universal gravitational constant (6.67 x 10-11 (Nm2/kg2) kg2/ m2)
iv. Ag = GMp/ (Rp +h)2 [h= distance above planet]
b. Finding out generally what is the force of gravity for an object near the surface of the earth
i. Fg= GMEmobj./ RE2 à Fg = [6.67 x 10-11 (Nm2/kg2) kg2/ m2][5.08 x 1024 kg] [mobj]/ [6.38 x 106m)2 à Fg= mobj (9.8 m/s2)
ii. Fg = W (weight) = mg
iii. ∑F = ma à Fg = ma à a = Fg/m
GMM.jpg
2) Tension (T or Ft): When a cord (or a rope, cable, etc) is attached to a body and is pulled so that it is taut, the cord pulls on the body with a force “T” directed away from the body, along the cord
a. Assumptions:
i. Cord has negligible mass compared to the body’s mass
ii. Assume that the cord is un-strechable (rigid cord)
iii. Cord exists only as a connection b/w two bodies
OC0811004_L6Pulley.gif
3) Normal Force (Fn or n): When a body presses against a surface the surface (even a seemingly rigid one) deforms and pushes back on the body with a normal force (Fn) that is perpendicular to the surface

normal_force.gif





external image forces.gif




4) Friction (f or Ffr): A force directed along a surface, opposite the direction of the impending/intended motion relative to that surface, due to bonding b/w the body and the surface
car_friction2.giffriction_equation-normal_block.gif
friction.png
Friction for the line rider
Friction for the line rider


Mr. Natland recommends reading section on frictional forces on pg. 103!

-Pressure = Force / Area
What factors affect friction?
- Coefficient of friction: Materials in contact with each other
- Moving or not? (static and kinetic coefficients)

Tarzan … on Ice
Jane pushes off of Tarzan with a force of 100N to the right. Mass of Jane à 60 kg, Mass of Tarzan à 90 kg.

a) What is the magnitude of the force on Tarzan? Jane?
- Force on Tarzan would be force that Jane is applying which is 100N. Tarzan would be exerting force of 100N on Jane also.

b) What are Tarzan and Jane’s respective accelerations?
- Tarzan: aTarzan= FJane/mTarzan
- Jane: aJane = -FTarzan/ mJane

c) If Jane is pushing off for .7s, what are their respective velocities after this time interval?
VT = V0 + att, V0 = 0 VJ = V0 + aJt, V0 = 0
VT = 0.78 m/s VJ = -1.167

d) After .7 seconds the velocity stays constant because there is only an acceleration when a force is being applied.

-The tension in a string is the same throughout the string
-When you have action/reaction forces within the system they will cancel each other out and cannot cause the system to accelerate, called internal forces
-Constant velocity = No net force

Friction:
-All surfaces are rough (even if they appear to be smooth)
-Coldwells form between 2 surfaces
Ffr = µ Fn
-Kinetic Friction: an object slides relative to another
-Always in the opposite direction of the movement
-Static Friction: the two objects are non-moving
Examples:
1) Paper falls through the air:
IMG_0334.JPG
2) Block hanging from ropes:
IMG_0335.JPG
3) Mass hanging off-center:
IMG_0336.JPG
4) Hanger, band, and mass: (person squeezes the hanger b/w two fingers)
IMG_0337.JPG
5) Eraser against the wall:
IMG_0338.JPG
6) Hold eraser against frictionless surface:
IMG_0339.JPG
7) Push chair to the right but it doesn't move:
IMG_0340.JPG
8) Pull the chair to the right across the floor:
IMG_0341.JPG
9) A book sits on an inclined table:
IMG_0342.JPG
10) Book slides down an incline:
IMG_0343.JPG
11) Book slides across a table with a box on top:
IMG_0344.JPG
12) Box rests on top of the book as it moves across a table:
IMG_0345.JPG
13) Box rests on a book during initial acceleration:
IMG_0346.JPG
14) Book with box on top during acceleration phase:
IMG_0347.JPG
Steps for Solving Force Problems:

1. Draw picture of situation
2. Draw FBD of system
3. Break any force at an angle to your coordinate system into perpendicular components
4. Apply component form of Newton's 2nd Law
5. Use kinematics, if necessary.

Newton's 3rd Law:

If object 1 exerts a force on object 2, then object 2 will exert a force back onto object 1 that is equal in magnitude and opposite in direction.
thirdlaw.gif
-These action/reaction pairs are applied to different objects
-They must be the same type



In other words:
III. For every action there is an equal and opposite reaction.


external image skater.gif

Examples:

You push down with your hand on a desk, and the desk pushes upward with a force equal in magnitude to your push.
A brick is in free fall. The brick pulls the Earth upward with the same force that the Earth pulls the brick downward.
When you walk, your feet push the Earth backward. In response, the Earth pushes your feet forward, which is the force that moves you on your way.

Example Problems with Solutions:

EXAMPLE 1
external image sled.gif





The Three Stooges are dragging a 10 kg sled across a frozen lake. Moe pulls with force M, Larry pulls with force L, and Curly pulls with force C. If the sled is moving in the external image phy.total.SMALL114.gif direction, and both Moe and Larry are exerting a force of 10 N, what is the magnitude of the force Curly is exerting? Assuming that friction is negligible, what is the acceleration of the sled? (Note: sin 30 = cos 60 = 0.500 and sin 60 = cos 30 = 0.866.)

The figure above gives us a free-body diagram that shows us the direction in which all forces are acting, but we should be careful to note that vectors in the diagram are not drawn to scale: we cannot estimate the magnitude of C simply by comparing it to Mand L.What is the magnitude of the force Curly is exerting?Since we know that the motion of the sled is in the external image phy.total115.gif direction, the net force, M + L +C, must also be in the external image phy.total116.gif direction. And since the sled is not moving in the external image phy.total117.gif direction, the y-component of the net force must be zero. Because the y-component of Larry’s force is zero, this implies:
external image m2+c2=0.gif
where external image phy.total118.gif is the y-component of M and external image phy.total119.gif is the y-component of C. We also know:
external image NEWmy=msin.gif
If we substitute these two equations for external image phy.total120.gif and external image phy.total121.gif into the equation external image phy.total122.gif, we have:
external image 8.660NEW.gif
What is the acceleration of the sled?According to Newton’s Second Law, the acceleration of the sled is a = F/m. We know the sled has a mass of 10 kg, so we just need to calculate the magnitude of the net force in the external image phy.total123.gif-direction.
external image NEWmx+lx+cx.gif
Now that we have calculated the magnitude of the net force acting on the sled, a simple calculation can give us the sled’s acceleration:
external image NEWafm=.gif
We have been told that the sled is moving in the external image phy.total124.gif direction, so the acceleration is also in the external image phy.total125.gif direction.This example problem illustrates the importance of vector components. For the SAT II, you will need to break vectors into components on any problem that deals with vectors that are not all parallel or perpendicular. As with this example, however, the SAT II will always provide you with the necessary trigonometric values.EXAMPLE 2




Each of the following free-body diagrams shows the instantaneous forces, F, acting on a particle and the particle’s instantaneous velocity, v. All forces represented in the diagrams are of the same magnitude.

external image freebodies.gif



1.
In which diagram is neither the speed nor the direction of the particle being changed?



2.
In which diagram is the speed but not the direction of the particle being changed?



3.
In which diagram is the direction but not the speed of the particle being changed?



4.
In which diagram are both the speed and direction of the particle being changed?

The answer to question 1 is B. The two forces in that diagram cancel each other out, so the net force on the particle is zero. The velocity of a particle only changes under the influence of a net force. The answer to question 2 is C. The net force is in the same direction as the particle’s motion, so the particle continues to accelerate in the same direction. The answer to question 3 is A. Because the force is acting perpendicular to the particle’s velocity, it does not affect the particle’s speed, but rather acts to pull the particle in a circular orbit. Note, however, that the speed of the particle only remains constant if the force acting on the particle remains perpendicular to it. As the direction of the particle changes, the direction of the force must also change to remain perpendicular to the velocity. This rule is the essence of circular motion, which we will examine in more detail later in this book. The answer to question 4 is D. The net force on the particle is in the opposite direction of the particle’s motion, so the particle slows down, stops, and then starts accelerating in the opposite direction.

Atwood's Machine:

atwood.gif
system: m system: M
∑F = ma ∑F = Ma
T-mg = ma Mg-T = Ma

system: m and M
∑F = (m+M)a
Mg-mg = (m+M)a




How do you determine the normal force?

*MISCONCEPTION: the normal force is NOT always equal to the weight of an object.

Six Basic Cases of the Normal Force:

scan0006.jpg

scan0005.jpg
When the elevator moves down your inertia cause lighter.
When the elevator moves upward your inertia cause you to push more into the floor and feel heavier.
Friction

Static:
-not moving/impending motion

not moving: fs= F(applied)

object just about to move: fs = µs x F(normal)


Imagine, once more, that you are pushing a box along a floor. When the box is at rest, it takes some effort to get it to start moving at all. That’s because the force of static friction is resisting your push and holding the box in place.
external image static_friction.gif
In the diagram above, the weight and the normal force are represented as W and Nrespectively, and the force applied to the box is denoted by external image phy.total126.gif. The force of static friction is represented by external image phy.total127.gif, where external image phy.total128.gif. The net force on the box is zero, and so the box does not move. This is what happens when you are pushing on the box, but not hard enough to make it budge.
Static friction is only at work when the net force on an object is zero, and hence when external image phy.total129.gif. If there is a net force on the object, then that object will be in motion, and kinetic rather than static friction will oppose its motion.

Kinetic:
-moving relative to other surface in contact


fk = µk x F(normal)

µs greater than µk because harder to get something moving than to keep it moving


The force of static friction will only oppose a push up to a point. Once you exert a strong enough force, the box will begin to move. However, you still have to keep pushing with a strong, steady force to keep it moving along, and the box will quickly slide to a stop if you quit pushing. That’s because the force of kinetic friction is pushing in the opposite direction of the motion of the box, trying to bring it to rest.
external image kinetic_friction.gif

Though the force of kinetic friction will always act in the opposite direction of the force of the push, it need not be equal in magnitude to the force of the push. In the diagram above, the magnitude of external image phy.total130.gif is less than the magnitude of external image phy.total131.gif. That means that the box has a net force in the direction of the push, and the box accelerates forward. The box is moving at velocity v in the diagram, and will speed up if the same force is steadily applied to it. If external image phy.total132.gif were equal to external image phy.total133.gif, the net force acting on the box would be zero, and the box would move at a steady velocity of v, since Newton’s First Law tells us that an object in motion will remain in motion if there is no net force acting on it. If the magnitude of external image phy.total134.gif were less than the magnitude of external image phy.total135.gif, the net force would be acting against the motion, and the box would slow down until it came to a rest.

Coefficient of friction is normally greater than 0 but less than 1

friction_graph_.jpg


The amount of force needed to overcome the force of static friction on an object, and the magnitude of the force of kinetic friction on an object, are both proportional to the normal force acting on the object in question. We can express this proportionality mathematically as follows:
external image fkinetic.gif
where external image phy.total136.gif is the coefficient of kinetic friction, external image phy.total137.gif is the coefficient of static friction, and N is the magnitude of the normal force. The coefficients of kinetic and static friction are constants of proportionality that vary from object to object.Note that the equation for static friction is for the maximum value of the static friction. This is because the force of static friction is never greater than the force pushing on an object. If a box has a mass of 10 kg and external image phy.total138.gif = 0.5, then:
external image fstatic.gif
If you push this box with a force less than 49 newtons, the box will not move, and consequently the net force on the box must be zero. If an applied force external image phy.total139.gif is less than external image phy.total140.gif, then external image phy.total141.gif = –external image phy.total142.gif.

click link to view picture. http://mypages.iit.edu/~smile/weekly/cartilted.gif (Static Friction Car Picture)
W: Weight
N: Normal Force
F: Force of Static Friction
The force of static friction between the car and the table keeps the car from sliding down off of the table

click link to view picture.
http://images.google.com/imgres?imgurl=http://www.ux1.eiu.edu/~cfadd/1150/04Nwtn/Images/inclAtWd1.gif&imgrefurl=http://www.ux1.eiu.edu/~cfadd/1150/04Nwtn/frict.html&usg=__dh0xveO0J9Q6NjrYxetKgsbvgb8=&h=297&w=437&sz=24&hl=en&start=1&um=1&tbnid=F9GaG-iMxe6hqM:&tbnh=86&tbnw=126&prev=/images%3Fq%3Dkinetic%2Bfriction%26hl%3Den%26rls%3Dcom.microsoft:en-us%26sa%3DN%26um%3D1 (Kinetic Friction Box Picture)

Fk : Force of Kinetic Friction
N: Normal Force
F: Force applied
W: Weight
Once the force applied surpasses the force of static friction, the object begins to move to the right. However, the surface still exerts a force on the object in motion. This is the force of Kinetic Friction, symbolized by the symbol Fk



Uniform Circular Motion
- objects always move at constant speed
- for an object to move in a circe, there must be a net force (∑Fnet) pointing towards the center of the circle at all times
- if there is a net force pointing towards center of circle, there is an acceleration in the same direction
- known as CENTRIPETAL ACCELERATION
- ac = v2/r
- applying Newton's 2nd law to UCM
1. sum up forces directed towards the center of the circle
∑Fc = mv2/r
*Question to ask yourself: What forces in your free body diagram is (are) causing the centripetal motion?

external image 20114114.JPG

u6l1a6.gif Question
1. A tube is been placed upon the table and shaped into a three-quarters circle. A golf ball is pushed into the tube at one end at high speed. The ball rolls through the tube and exits at the opposite end. Describe the path of the golf ball as it exits the tube.



Answer: The ball will move along a path which is tangent to the spiral at the point where it exits the tube. At that point, the ball will no longer curve or spiral, but rather travel in a straight line in the tangential direction.






external image u6l1c10.gif
external image u6l1c3.gif
external image u6l1c4.gif
As a car makes a turn, the force of friction acting upon the turned wheels of the car provides centripetal force required for circular motion.
As a bucket of water is tied to a string and spun in a circle, the tension force acting upon the bucket provides the centripetal force required for circular motion.
As the moon orbits the Earth, the force of gravity acting upon the moon provides the centripetal force required for circular motion.


Free Body Diagram Examples

1) rounding a flat curve in your car

UCM_1.jpg

2) dice in your car while rounding a flat curve
UCM_2.jpg

3) plane
UCM_3.jpg

4) satellite
UCM_4.jpg

5) gravitron
UCM_5.jpg

6) swinging stone in vertical circle
UCM_6.jpg

7) banked curve
UCM_7.jpg

8) artificial gravity
UCM_8.jpg





external image 0199210896.centrifugal-force.1.jpg

Physics can be seen in every day life, like the Olympics!!


Other Important Equations

V = 2πr/T
Fc = mv2/r

Fc = 4π2mr/T2

Sample Problems

1) A 2 kg ball on a string is rotated about a circle of radius 10 m. The maximum tension allowed in the string is 50 N. What is the maximum speed of the ball?

Solution for Problem 1 >>
The centripetal force in this case is provided entirely by the tension in the string. If the maximum value of the tension is 50 N, and the radius is set at 10 m we only need to plug these two values into the equation for centripetal force:

T = F c = implies that v =
thus

v = = 15.8 m/s

2) A satellite is said to be in geosynchronous orbit if it rotates around the earth once every day. For the earth, all satellites in geosynchronous orbit must rotate at a distance of 4.23×107 meters from the earth's center. What is the magnitude of the acceleration felt by a geosynchronous satellite?

Solution for Problem 2 >>
The acceleration felt by any object in uniform circular motion is given by a = . We are given the radius but must find the velocity of the satellite. We know that in one day, or 86400 seconds, the satellite travels around the earth once. Thus:

v = = = = 3076 m/s
thus

a = = = .224 m/s2
Close

Orbits:

How Do Orbits Work?Imagine a baseball pitcher with a very strong arm. If he just tosses the ball lightly, it will fall to the ground right in front of him. If he pitches the ball at 100 miles per hour in a line horizontal with the Earth, it will fly somewhere in the neighborhood of 80 feet before it hits the ground. By the same token, if he were to pitch the ball at 100,000 miles per hour in a line horizontal with the Earth, it will fly somewhere in the neighborhood of 16 miles before it hits the ground. Now remember: the Earth is round, so if the ball flies far enough, the ball’s downward trajectory will simply follow the curvature of the Earth until it makes a full circle of the Earth and hits the pitcher in the back of the head. A satellite in orbit is an object in free fall moving at a high enough velocity that it falls around the Earth rather than back down to the Earth.
external image orbit.gif
Gravitational Force and Velocity of an Orbiting SatelliteLet’s take the example of a satellite of mass external image phy.total481.gif orbiting the Earth with a velocity v. The satellite is a distance R from the center of the Earth, and the Earth has a mass of external image phy.total482.gif.
external image satellite.gif
The centripetal force acting on the satellite is the gravitational force of the Earth. Equating the formulas for gravitational force and centripetal force we can solve for v:
external image gmsmer2.gif

As you can see, for a planet of a given mass, each radius of orbit corresponds with a certain velocity. That is, any object orbiting at radius R must be orbiting with a velocity of external image phy.total483.gif. If the satellite’s speed is too slow, then the satellite will fall back down to Earth. If the satellite’s speed is too fast, then the satellite will fly out into space.





FUN STUFF
external image ferrari-f2008-launch-6.jpg
-The wing on the front of the car adds a greater force downward which, in turn, increases the normal force. Since the normal force is increased, the static frictional force increases, which causes the car to skid less and travel faster.


external image rcd.gif
- In a roller coaster, what keeps the car moving along the curved path is the centipetal force. The centripetal force prevents the car from exiting the curve by continuously making it change its direction toward the center of the circle. In this example, for the most part the centripetal force is the normal force. Gravity also pulls down on the car with a constant force, whether it moves uphill, downhill, or through the loop. At the very bottom of the loop, gravity and the centripetal force act in different directions. On the other hand, at the very top of the loop, both the normal force and the force of gravity act in the same direction to produce the centripetal force. No matter what, the centripetal force always points towards the center of the circle.
- Note: If you are asked how fast the car may be going just before losing contact with the tracks, then the normal force between the car and tracks is zero.






Videos & Interesting Links

http://www.youtube.com/watch?v=2V9h42yspbo
( //Aboard NASA's// '//Vomit Comet//' - RIT students experience zero gravity while conducting reduced-gravity scientific experiments aboard NASA's "Vomit Comet" aircraft; reported by Kelly Downs of RIT University News.)

http://xkcd.com/123/
(An accurate, not-so-useful comic discussing the centripetal vs. centrifugal force)

http://www.haydenplanetarium.org/tyson/read/essays/nathist/fivepointslagrange
(An article about the 5 points of Lagrange, where gravitation forces balance so something placed at one of these points will remain there - useful for potentially building a space station?)
external image 250px-Lagrange_points_Earth_vs_Moon.jpg
external image magnify-clip.pngA diagram showing the five Lagrangian points in a two-body system with one body far more massive than the other (e.g. the Earth and the Moon). In such a system L3L5 will appear to share the secondary's orbit, although in fact they are situated slightly outside it. An object placed in orbit around L5 (or L4) will remain there indefinitely without having to expend fuel to keep its position, whereas an object placed at L1, L2 or L3 (all points of unstable equilibrium) may have to expend fuel if it drifts off the point.

http://science.howstuffworks.com/space-station.htm/printable
(How Stuff Works article about space stations)
This is an artist's conception of what the inside of a future space colony could look like.  What do you think?
This is an artist's conception of what the inside of a future space colony could look like. What do you think?

Apparent Weight



<object wdth="560" height="340"><param name="movie" value="http://www.ytube.com/v/25CmOdcKWN8&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/25CmOdcKWN8&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" w

Condensed Guide to :
(3 1/2 minutes to understanding forces)


http://www.youtube.com/watch?v=kr-fJHA8fyQ



<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/S0tMhlhnga0&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/S0tMhlhnga0&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>

Way better Video than the one above...
Centripetal forces and friction


This video shows how a banked curve allows cyclists to achieve greater speed without sliding off the course. However, once the friction between the tires and the track is overcome by the crash, the bikers slide towards the outside of the the track due to the lack of a significant centripetal force. You can tell that the curve is banked because all the bikers slide back into the middle after the crash.


http://www.youtube.com/watch?v=S0tMhlhnga0


SOURCES

http://science.howstuffworks.com/space-station.htm/printable
(artist's conception of space station)

http://en.wikipedia.org/wiki/L5_Society
(picture showing the 5 points of Lagrange)

http://www.physicsclassroom.com/mmedia/circmot/rcd.cfm
(animation of the forces varying during a roller coaster loop-de-loop)

http://www.f1-blog.co.uk/2009/01/16/new-f1-vs-old-f1/
(picture of formula 1 race car)

http://www.rpdp.net/sciencetips_v3/P8B1.htm
(friction picture)

http://library.thinkquest.org/2745/data/newton.htm
(picture of Newton's third law)

http://www.staff.amu.edu.pl/~romangoc/graphics/M3/7-atwood-machine/M3-7-fig1.gif
(Atwood's machine)

http://blog.dotphys.net/2009/06/the-physics-of-michael-jacksons-moonwalk/
(graph of friction) ***really cool article about the physics of MJ's moonwalk

http://www.youtube.com/watch?v=kr-fJHA8fyQ
(Quick Guide to Forces Video)

http://www.youtube.com/watch?v=S0tMhlhnga0
(biking video about banked curves with centripedal accel.)

http://mypages.iit.edu/~smile/weekly/cartilted.gif (Static Friction Car Picture)


http://images.google.com/imgres?imgurl=http://www.ux1.eiu.edu/~cfadd/1150/04Nwtn/Images/inclAtWd1.gif&imgrefurl=http://www.ux1.eiu.edu/~cfadd/1150/04Nwtn/frict.html&usg=__dh0xveO0J9Q6NjrYxetKgsbvgb8=&h=297&w=437&sz=24&hl=en&start=1&um=1&tbnid=F9GaG-iMxe6hqM:&tbnh=86&tbnw=126&prev=/images%3Fq%3Dkinetic%2Bfriction%26hl%3Den%26rls%3Dcom.microsoft:en-us%26sa%3DN%26um%3D1 (Kinetic Friction Box Picture)